OcNOS-RON : Layer 3 Guide : Routing Information Protocol Command Reference : RIPng Commands : show debugging ipv6 rip
show debugging ipv6 rip
Use this command to display the RIPng debugging status for RIPng NSM, RIPng events, and RIPng packets.
Command Syntax
show debugging ipv6 rip
Parameters
None
Command Mode
Exec Mode and Privileged Exec Mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show debugging ipv6 rip
RIPng packet debugging is on
 
Last modified date: 08/28/2023