access-list logging cache-size
Use this command to set the ACL logging table size.
Use the no form of this command to set the table size to its default (1000).
Command Syntax
access-list logging cache-size <1000-10000>
no access-list logging cache-size
Parameters
<1000-10000>
Maximum number of cache entries
Default
By default, the logging table size is 1000.
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#access-list logging cache-size 2000
(config)#end
Last modified date: 08/28/2023