hardware-profile statistics (Qumran)
Use this command to enable or disable filter statistics in hardware.
Note: You must reboot the switch after giving this command for the changes to take effect.
Command Syntax
hardware-profile statistics (ingress-acl|mpls-ac|mpls-lsp|mpls-pwe) (enable|disable)
Parameter
ingress-acl
Ingress ACL statistics.
mpls-ac
Attachment circuit statistics.
mpls-lsp
LSP statistics.
mpls-pwe
Pseudowire logical interfaces statistics.
enable
Enable statistics.
disable
Disable statistics.
Default
By default, filter statistics are disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
This command is only available on Qumran platforms.
Examples
#configure terminal
(config)#hardware-profile statistics mpls-lsp enable
Last modified date: 08/28/2023