show controller details
Use this command to display the EEPROM details of transceiver.s
Command Syntax
show interface (IFNAME|) controllers
Parameters
IFNAME
Interface name. If not specified, this command displays details of all connected transceivers.
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show interface xe52/1 controllers
Port Number : 52
Vendor oui : 0x0 0x17 0x6a
Vendor name : AVAGO
Vendor part_no : AFBR-79E4Z
serial_number : QB380161
transceiver_type : QSFP OR LATER
connector_type : MPO 1x12
qsfp_transceiver_code : 1X-LX
vendor_rev : 01
date_code : 110920 (yymmddvv, v=vendor specific)
encoding : SONET
br_nominal : 103 (100 MHz)
length_km : 0
length_mtr : 50
length_50mt : 0
length_62_5mt : 0
length_cu : 0
cc_base : 0x7d
cc_ext : 0x28
DDM Support : yes
Last modified date: 08/28/2023