OcNOS-RON : System Management Guide : System Management Command Reference : Erbium-doped Fiber Amplifier Commands : edfa target-gain
edfa target-gain
Use this command to configure EDFA interface target gain.
Command Syntax
edfa target-gain VALUE
Parameters
VALUE
Target gain value.
Default
None
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 6.3.0.
Example
OcNOS(config-if)#edfa target-gain 15
OcNOS(config-if)#commit
Last modified date: 08/28/2023