OcNOS-RON : System Management Guide : System Management Command Reference : Erbium-doped Fiber Amplifier Commands : edfa target-outpwr
edfa target-outpwr
Use this command to configure EDFA interface target output power.
Command Syntax
edfa target-outpwr VALUE
Parameters
VALUE
Target output power value.
Default
None
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 6.3.0.
Example
OcNOS(config-if)#edfa target-outpwr 7
OcNOS(config-if)#commit
Last modified date: 08/28/2023