OcNOS-RON : System Management Guide : System Management Command Reference : Interface Commands : mac-address
mac-address
Use this command to set the L3 interface current hardware address
Use the no parameter to remove the L3 interface current hardware address
Command Syntax
mac-address (MAC|use-physical)
no mac-address
Parameter
MAC
MAC-address in HHHH.HHHH.HHHH format (only support on L3 Interfaces)
use-physical
Only for physical L3 interface to use its physical MAC
Command Mode
Interface mode
Applicability
Command syntax updated from 1.3.3 onwards
Examples
OcNOS#conf t
OcNOS(config)#int xe1/1
OcNOS(config-if)#mac-address 0000.1111.2222
Last modified date: 08/28/2023