ntp source-interface
Use this command to configure an NTP source-interface. NTP sets the source IP address for all NTP packets based on the address of the interface through which the NTP packet are sent.
Use the no option with this command to remove an NTP server.
Command Syntax
ntp source-interface IFNAME
Parameter
IFNAME
Interface name
Default
No default value is specified.
Command Mode
Configure mode
Applicability
This command was introduced in a version before OcNOS version 1.3.
Examples
#configure terminal
(config)#ntp source-interface xe7/1
(config)#no ntp source-interface xe7/1
Last modified date: 08/28/2023