show techsupport
Use this command to collect system data for technical support to save support information in a compressed (.gz) file.
The default file path is /var/log/ and the filename is tech_support_YYYY_MMM_DD_HH_MM_SS.tar.gz.
The filename given can be the same as another file; to distinguish them, each of the filenames are appended with a date and timestamp.
If a show techsupport command execution is in progress, any newly issued show techsupport commands are ignored.
If a show techsupport command is executing, and the show running-config command is given, the displayed information is copied from the show techsupport command.
Command Syntax
show techsupport ({all|authd|bgp|cmmd|hostpd|hsl|imi|isis|l2mribd|lag|ldp|mribd|mstp|nd|nsm|oam|onm|ospf|ospf6|pim|ptp|rib|rip|ripng|rsvp|sflow|synce|vrrp})
Parameters:
all
ALL Related Information
authd
AUTHD Related Information
bgp
BGP Related Information
cmmd
CMMD Related Information
hostpd
HOSTP Related Information
hsl
HSL Related Information
imi
IMI Related Information
isis
ISIS Related Information
l2mribd
L2MRIB Related Information
lag
LAG/LACP Related Information
ldp
LDP Related Information
mribd
MRIB Related Information
mstp
MSTP Related Information
nd
NDD Related Information
nsm
NSM Related Information
oam
BFD Related Information
onm
ONM/LLDP Related Information
ospf
OSPF Related Information
ospf6
OSPF6 Related Information
pcep
PCEP Related Information
pim
PIM Related Information
ptp
PTP Related Information
rib
RIB Related Information
rip
RIP Related Information
ripng
RIPNG Related Information
rsvp
RSVP Related Information
sflow
SFLOW Related Information
synce
SYNCE Related Information
vrrp
VRRP Related Information
Default
The default file path for show techsupport is /var/log/.
Command Mode
Privileged EXEC
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show techsupport all
#show techsupport bgp
#show techsupport bgp isis
Last modified date: 08/28/2023