software-watchdog keep-alive-time
Use this command to set the software watchdog keep-alive time interval in seconds. The default keep-alive time interval is 60 seconds.
Use the no form of this command to set default keep-alive time interval.
Command Syntax
software-watchdog keep-alive-time <30-1800>
no software-watchdog keep-alive-time
Parameters
<30-1800>
Keep-alive time interval in seconds
Default
By default, software watchdog is enabled and the keep-alive time interval is 60 seconds.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
#(config)software-watchdog keep-alive-time 100
Last modified date: 08/28/2023