OcNOS-RON : System Management Guide : System Management Command Reference : sFlow Commands : sflow enable
sflow enable
Use this command to enable or disable sampling on an interface after giving the sflow sampling-rate command on the same interface.
Command Syntax
sflow enable
no sflow enable
Default
By default, sFlow sampling is disabled.
Parameters
None
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#interface xe1
(config-if)#sflow sampling-rate 1024 direction ingress max-datagram-size 200
(config-if)#sflow enable
(config-if)#no sflow enable
Last modified date: 08/28/2023