sflow rate-limit
Use this command to set the CPU rate limit in packets per second.
Use the no form of this command to set the CPU rate limit to its default (0).
Command Syntax
sflow rate-limit <2000-100000>
no sflow rate-limit
Parameters
<2000-100000>
Rate limit in packets per second
Default
The default rate limit is zero (0).
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
This command is not available on Qumran platforms.
Examples
#configure terminal
(config)#sflow rate-limit 5000
Last modified date: 08/28/2023