dynamic-learning disable
Use this command to disable dynamic learning of MACs at the access port. This command also disables dynamic learning of MAC/IP from ARP/ND messages received on this access port.
Use the no form of this command to enable dynamic learning of MACs at the access port.
Command Syntax
dynamic-learning disable
no dynamic-learning disable
Parameters
None
Default
By default, the dynamic-learning option is enabled.
Command Mode
NVO access interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#nvo vxlan access-if port-vlan xe1 2
(config-nvo-acc-if)#dynamic-learning disable
(config-nvo-acc-if)#exit
Last modified date: 08/28/2023