evpn vxlan multi-homing enable
Use this command to enable evpn vxlan multi-homing
Use the no form of this command to disable evpn vxlan multi-homing.
Note: Node will have to be restarted for this to be applicable. If there are some nodes in topology which have multi-homed CEs, then nodes which do not have multi-homed CEs should also enable multihoming so, that they can load share traffic to the multi-homed CEs.
Command Syntax
evpn vxlan multihoming enable
no evpn vxlan multihoming enable
Parameters
None
Default
By Default Multi-homing will be d]isabled
Command Mode
Configuration Mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
#(config)# evpn vxlan multihoming enable
#(config)# exit
Last modified date: 08/28/2023