garp-gna enable
Use this command to enable GARP/GNA packets per vxlan on the outgoing access interfaces where it is configured.
Use the no form this command to disable GARP/GNA packets on the outgoing access interfaces.
By default it will be disable
Command Syntax
garp-gna enable
garp-gna enable
Parameters
None
Command Mode
config-nvo-acc-if mode
Applicability
This command is introduced in OcNOS version 1.3.
Example
#configure terminal
(config)#nvo vxlan access-if port-vlan xe1 10
config-nvo-acc-if)#garp-gna enable
Last modified date: 08/28/2023