map vnid
Use this command to map a tenant to an access-port.
Use the no form of this command to remove the tenant from an access-port
Command Syntax
map vnid <1-16777215>
no map vnid <1-16777215>
Parameters
<1-16777215>
VxLAN network identifier.
Default
No default value is specified for map vnid command.
Command Mode
NVO access interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#nvo vxlan access-if port-vlan xe1 2
(config-nvo-acc-if)#map vnid 100
(config-nvo-acc-if)#exit
Last modified date: 08/28/2023