show nvo vxlan access-if-config
Use this command to display the current running configuration of the access interface.
Command Syntax
show nvo vxlan access-if-config (LINE|)
Parameters
LINE
Access port description.
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3,
Added new cli "garp-gna enable" under access-if cli in OcNOS version 1.3.6.
Example
#show nvo vxlan access-if-config
nvo vxlan access-if port-vlan xe1 2
map vnid 100
garp-gna enable
access-if-description member-port with xe1 as vlan 2
dynamic-learning disable
arp-nd flood-suppress
arp-cache disable
nd-cache disable
shutdown
mac 0000.0000.1111
mac 0000.0000.aaaa ip 12.12.12.1
mac 0000.0000.bbbb ipv6 1201::1
map qos-profile ingress 100
cos 2 egress
!
nvo vxlan access-if port-vlan po1 6 inner-vlan 5
encapsulation 0x9100
no shutdown
map vnid 100
!
Last modified date: 08/28/2023