show running-config nvo vxlan
Use this command to display the current running configuration of VxLANs.
Command Syntax
show running-config nvo vxlan
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in a version before OcNOS version 1.3 and added few CLIs for IRB and ARP-ND refresh timer for OcNOS version 1.3.5.
Example
#show running-config nvo vxlan
!
nvo vxlan multihoming enable
!
nvo vxlan enable
!
nvo vxlan vtep-ip-global 1.1.1.1
!
nvo vxlan tunnel qos-map-mode cos-dscp ingress QUE_DSCP
!
nvo vxlan tunnel qos-map-mode cos-dscp egress DSCP_QUE
!
nvo vxlan id 100 ingress-replication inner-vid-disabled
vxlan host-reachability-protocol evpn-bgp vrf1
mac-holdtime 20
!
nvo vxlan access-if port-vlan xe1 2
map vnid 100
access-if-description member-port with xe1 as vlan 2
dynamic-learning disable
arp-nd flood-suppress
arp-cache disable
nd-cache disable
shutdown
mac 0000.0000.1111
mac 0000.0000.aaaa ip 12.12.12.1
mac 0000.0000.bbbb ipv6 1201::1
map qos-profile cos-to-queue COS_QUE
map qos-profile queue-color-to-cos QUE_COS
!
nvo vxlan access-if port-vlan po1 6 inner-vlan 5
encapsulation 0x9100
no shutdown
map vnid 100
!
Last modified date: 08/28/2023