vxlan host-reachability-protocol evpn-bgp
Use this command to set the host reachable protocol to Ethernet-VPN over BGP. This defines BGP as the mechanism for host reachability advertisement.
Use use the no form of this command to remove Ethernet-VPN as the host reachable protocol.
Command Syntax
vxlan host-reachability-protocol evpn-bgp NAME
no vxlan host-reachability-protocol evpn-bgp
Parameters
NAME
Name of the VRF to carry VNID routes.
Default
No default value is specified for vxlan host-reachability-protocol command.
Command Mode
NVO mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#nvo vxlan id 3
(config-nvo)#vxlan host-reachability-protocol evpn-bgp Blue
Last modified date: 08/28/2023