Symptom/Cause | Solution |
ONIE Image/IP address not fetched from DHCP server | Ensure DHCP server is up and reachable from device. |
ONIE Image/IP address not fetched from DHCP server | Ensure DHCP server config file has proper info for this device. Things to check in dhcpd.conf file: • Device MAC address is proper, if MAC address based config is used. • Device VCI is proper in DHCP config file. Use onie-sysinfo command to check the same. • Syntax and value provided for DHCP options to be used by this device is proper. |
Error: license & config already exist on device. Skipping ZTP provided data check. | As device already had old license and config, ZTP provided info are discarded |
Error: Lease info from DHCP server not found. Skipping | Ensure that DHCP server is up and reachable. Install license and then config manually once device is UP |
Error: Unable to download the startup config mentioned at ZTP/DHCP server! | Ensure that ZTP provided config file path is reachable and having download permission. Install license and then config manually once device is UP. |
Error: Unable to download the license provisioned through ZTP/DHCP server! | Ensure that ZTP provided license file path is reachable and having download permission. If license path was provided in DHCP server config, ensure license file with this Device ID exists. Install license and then config manually once device is UP. |
Error: eth0 is not configured using dhcp | DHCP server didn't install IP address as dynamic. Please install license/config manually |
Error: ZTP provided config didn't get applied successfully | Ensure valid license was installed or provided by ZTP server. |