OpenConfig Optical Transport Networks
Overview
This document describes the OpenConfig configurations for Optical Transport Networks and state attributes supported by OcNOS OTN versions 5.0 and 5.1 and the limitations which apply for some of the paths.
Enable OpenConfig Translation
The OpenConfig feature is disabled by default and must be enabled using the following CLI command on the OcNOS shell.
OcNOS#cml netconf translation (disable|openconfig)
Or the equivalent NETCONF RPC:
<netconf-translation xmlns="http://ipinfusion.com/ns/zebmcli">
<status>disable|openconfig</status>
</netconf-translation>
Once enabled, the user is still able to get data in OcNOS format, by specifying the required namespace:
yangcli ocnos@localhost> sget-config /ipi-interface:interfaces source=running
This will generate the following RPC:
<get-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<source>
<running/>
</source>
<filter type="subtree">
<interfaces xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-interface"/>
</filter>
</get-config>
To get OpenConfig data, the corresponding namespace must be given:
yangcli ocnos@localhost> sget-config /oc-if:interfaces source=running
<get-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<source>
<running/>
</source>
<filter type="subtree">
<interfaces xmlns="http://openconfig.net/yang/interfaces"/>
</filter>
</get-config>
If no filter is provided and OpenConfig is enabled, all supported OpenConfig models will be retrieved in OpenConfig format. The OcNOS models for which no translation is supported will be retrieved in OcNOS format.
Enable Coherent modules
For all other configurations, enabling module previously is mandatory.
Configuration
Enable coherent modules (slot 6 and slot 3).
OpenConfig Netconf Payload:
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<config>
<power-admin-state>oc-platform-types:POWER_ENABLED</power-admin-state>
</config>
</linecard>
</component>
<component>
<name>SLOT-3</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<config>
<power-admin-state>oc-platform-types:POWER_ENABLED</power-admin-state>
</config>
</linecard>
</component>
</components>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#enable
OcNOS(config-module)#commit
OcNOS Netconf Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>3</slot-index>
<config>
<slot-index>3</slot-index>
<service-enable/>
</config>
</coherent-module>
<coherent-module>
<slot-index>6</slot-index>
<config>
<slot-index>6</slot-index>
<service-enable/>
</config>
</coherent-module>
</terminal-device>
Validation
Get OpenConfig Payload
<filter >
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<state>
</state>
</linecard>
</component>
</components>
</filter>
Get OpenConfig Return
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<state>
<power-admin-state>POWER_ENABLED</power-admin-state>
<slot-id>6</slot-id>
</state>
</linecard>
<state xmlns:oc-platform-types="http://openconfig.net/yang/platform-types">
<name>SLOT-6</name>
<equipment-failure xmlns="http://openconfig.net/yang/alarms">false</equipment-failure>
<temperature>
<alarm-status>false</alarm-status>
</temperature>
<id>SLOT-6</id>
<parent>CHASSIS</parent>
<oper-status xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:ACTIVE</oper-status>
<removable>true</removable>
<part-no>TRB200DAA-01</part-no>
<serial-no>VCD19330008</serial-no>
<software-version>NA</software-version>
<firmware-version>1.5</firmware-version>
<hardware-version>NA</hardware-version>
<description>NA</description>
<mfg-name>LUMENTUM</mfg-name>
<location>6</location>
<type xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:LINECARD</type>
</state>
<subcomponents xmlns="http://openconfig.net/yang/platform">
<subcomponent>
<name>PORT-coherent-6</name>
<state>
<name>PORT-coherent-6</name>
</state>
</subcomponent>
<subcomponent>
<name>PORT-ce27</name>
<state>
<name>PORT-ce27</name>
</state>
</subcomponent>
<subcomponent>
<name>PORT-ce28</name>
<state>
<name>PORT-ce28</name>
</state>
</subcomponent>
</subcomponents>
</component>
</components>
Host Interface, Network Interface, and Logical Channels
Loopback-type and prbs-type of Host Interface and Network interface were translated to logical channels. The picture below shows the correlation.
Optical-channel
• frequency
• operational mode
• output-power
The network interface was translated to an Optical channel and has the same value as a coherent module slot. (i.e. slot 6/ network interface 0→ och-6/0)
Logical-Channel
• loopback-type
• prbs-type
Were translated to logical channels. The index is represented by a 8 digits hexa number, where:
• 2 digits for slot
• 2 digits for network interface
• 2 digits for host interface
To avoid ambiguity, 1 is added to the desired interface.
For example, slot 6 host-interface 1 is represented by 0x060002.
In OpenConfig, this number is translated to decimal 393218.
Slot 4, network-interface 0 is represented by 0x040100.
In OpenConfig, this number is translated to decimal 262400.
Optical-channel and Logical-channel behavior on OcNOS
Both optical-channel and logical-channel are mapped to /terminal-device/coherent-module/network-interfaces/network-interface on OcNOS, so some specific information about the configuration and unconfiguration are necessary.
The mapping is:
OcNOS XPATH | OpenConfig XPATH |
/terminal-device/coherent-module/network-interfaces/interface/config/frequency | /components/component[name=OCH-X/Y]/optical-channel/config/frequency |
/terminal-device/coherent-module/network-interfaces/interface/config/operational-mode | /components/component[name=OCH-X/Y]/optical-channel/config/operational-mode |
/terminal-device/coherent-module/network-interfaces/interface/config/target-output-power | /components/component[name=OCH-X/Y]/optical-channel/config/target-output-power |
/terminal-device/coherent-module/network-interfaces/interface/config/soft-tx-disable | /terminal-device/logical-channels/channel[index]/config/admin-state |
/terminal-device/coherent-module/network-interfaces/interface/config/loopback-type | /terminal-device/logical-channels/channel[index]/config/loopback-mode |
When user creates optical-channel or logical-channel for the first time, it already creates the structure of /terminal-device/coherent-module/network-interfaces/interface/.
When user wants to delete the entire component OCH or logical-channels/channel, in OcNOS it will try to delete the /terminal-device/coherent-module/network-interfaces/interface/. So it is important to delete only one of them. The recommended is to delete network-interfaces through component OCH.
Examples:
<component operation="delete">
<name>OCH-1/0</name>
<name>OCH-1/0</name>
<channel operation=”delete”>
<index>393218</index>
In OcNOS there is a restriction that to delete the network-interfaces/interface, it must be empty, without any other configuration under it. So, if the user wants to delete on that level, the other configurations must be deleted one by one.
Loopback-type on Host Interface
Use to configure loopback type on the host interface. Two values are possible: FACILITY (shallow in Netconf mode) and TERMINAL (deep in Netconf mode).
Configuration
Configure slot 6, Host-interface 1 loopback -type to shallow.
OpenConfig Netconf Payload
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393218</index>
<config>
<index>393218</index>
<loopback-mode>oc-opt-types:FACILITY</loopback-mode>
</config>
</channel>
</logical-channels>
</terminal-device>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#host-interface 1
OcNOS(config-hostif)#loopback-type shallow
OcNOS(config-hostif)#commit
OcNOS(config-hostif)#
OcNOS Netconf Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<host-interfaces>
<interface>
<host-index>1</host-index>
<config>
<host-index>1</host-index>
<loopback-type>shallow</loopback-type>
</config>
</interface>
</host-interfaces>
</coherent-module>
</terminal-device>
Validation with Netconf get
Get Openconfig Payload
<filter type="subtree">
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393218</index>
<state/>
</channel>
</logical-channels>
</terminal-device>
</filter>
Get OpenConfig Return
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel xmlns:oc-opt-types="http://openconfig.net/yang/transport-types">
<index>393218</index>
<state>
<index>393218</index>
<logical-channel-type>oc-opt-types:PROT_ETHERNET</logical-channel-type>
<trib-protocol>oc-opt-types:PROT_ODU4</trib-protocol>
<description>preset</description>
<loopback-mode>FACILITY</loopback-mode>
</state>
<ethernet>
<state>
<out-block-errors>0</out-block-errors>
<out-pcs-bip-errors>0</out-pcs-bip-errors>
<in-block-errors>0</in-block-errors>
<in-pcs-bip-errors>2</in-pcs-bip-errors>
</state>
</ethernet>
</channel>
</logical-channels>
</terminal-device>
Unconfiguration
Use the operation delete to remove this configuration
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393218</index>
<config>
<index>393218</index>
<loopback-mode operation='delete'/>
</config>
</channel>
</logical-channels>
</terminal-device>
Loopback-type on Network Interface
Use to configure loopback type on the network interface. Two values are possible: FACILITY (shallow in Netconf mode) and TERMINAL ( deep in Netconf mode).
Configuration
Configuration of deep mode at slot 6, network interface 0.
Configure Loopback-type on Network Interface
Configure slot 6, Network-interface 0 loopback -type to deep.
OpenConfig Netconf Payload
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393472</index>
<config>
<index>393472</index>
<loopback-mode>oc-opt-types:TERMINAL</loopback-mode>
</config>
</channel>
</logical-channels>
</terminal-device>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#network-interface 0
OcNOS(config-netif)#loopback-type deep
OcNOS(config-netif)#commit
OcNOS Netconf Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<network-interfaces>
<interface>
<net-index>0</net-index>
<config>
<net-index>0</net-index>
<loopback-type>deep</loopback-type>
</config>
</interface>
</network-interfaces>
</coherent-module>
</terminal-device>
Validation with Netconf get
Payload Openconfig Get
<filter type="subtree">
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393472</index>
<state/>
</channel>
</logical-channels>
</terminal-device>
</filter>
Get OpenConfig Return
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel xmlns:oc-opt-types="http://openconfig.net/yang/transport-types">
<index>393472</index>
<state>
<index>393472</index>
<admin-state>ENABLED</admin-state>
<logical-channel-type>oc-opt-types:PROT_OTN</logical-channel-type>
<trib-protocol>oc-opt-types:PROT_OTU4</trib-protocol>
<description>preset</description>
<loopback-mode>TERMINAL</loopback-mode>
</state>
<logical-channel-assignments>
<assignment>
<index>1</index>
<state>
<index>1</index>
<assignment-type>OPTICAL_CHANNEL</assignment-type>
<optical-channel>OCH-6/0</optical-channel>
</state>
</assignment>
</logical-channel-assignments>
<otn>
<state>
<q-value>
<instant>2.60</instant>
</q-value>
<fec-uncorrectable-blocks>0</fec-uncorrectable-blocks>
<errored-blocks>0</errored-blocks>
</state>
</otn>
</channel>
</logical-channels>
</terminal-device>
Unconfiguration
Use the operation delete to remove this configuration
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393472</index>
<config>
<index>393472</index>
<loopback-mode operation='delete'/>
</config>
</channel>
</logical-channels>
</terminal-device>
Disable Coherent-Modules
Configuration
Disable coherent module 6.
OpenConfig Netconf Payload
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<config>
<power-admin-state>oc-platform-types:POWER_DISABLED</power-admin-state>
</config>
</linecard>
</component>
</components>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#disable
OcNOS(config-module)#commit
OcNOS Netconf Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<config>
<slot-index>6</slot-index>
<service-enable operation='delete'/>
</config>
</coherent-module>
</terminal-device>
Validation with Netconf get
Payload Openconfig Get
<filter >
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<state>
</state>
</linecard>
</component>
</components>
</filter>
Get OpenConfig Return
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>SLOT-6</name>
<linecard xmlns="http://openconfig.net/yang/platform/linecard">
<state>
<power-admin-state>POWER_DISABLED</power-admin-state>
<slot-id>6</slot-id>
</state>
</linecard>
<state xmlns:oc-platform-types="http://openconfig.net/yang/platform-types">
<name>SLOT-6</name>
<equipment-failure xmlns="http://openconfig.net/yang/alarms">false</equipment-failure>
<temperature>
<alarm-status>false</alarm-status>
</temperature>
<id>SLOT-6</id>
<parent>CHASSIS</parent>
<oper-status xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:INACTIVE</oper-status>
<removable>true</removable>
<part-no>NA</part-no>
<serial-no>NA</serial-no>
<software-version>NA</software-version>
<firmware-version>NA</firmware-version>
<hardware-version>NA</hardware-version>
<description>NA</description>
<mfg-name>NA</mfg-name>
<location>6</location>
<type xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:LINECARD</type>
</state>
<subcomponents xmlns="http://openconfig.net/yang/platform">
<subcomponent>
<name>PORT-coherent-6</name>
<state>
<name>PORT-coherent-6</name>
</state>
</subcomponent>
<subcomponent>
<name>PORT-ce27</name>
<state>
<name>PORT-ce27</name>
</state>
</subcomponent>
<subcomponent>
<name>PORT-ce28</name>
<state>
<name>PORT-ce28</name>
</state>
</subcomponent>
</subcomponents>
</component>
</components>
Operational-Mode
Use this command to select the operational modes, each mode configures specific modulation-format, fec-mode,
speed, grid-spacing.
speed, grid-spacing.
Configuration
Configure operational-mode 6 at slot 6, interface 0.
OpenConfig Netconf Payload
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<operational-mode>6</operational-mode>
</config>
</optical-channel>
</component>
</components>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#network-interface 0
OcNOS(config-netif)#operational-mode 6
OcNOS(config-netif)#commit
OcNOS(config-netif)#
Netconf OcNOS Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<network-interfaces>
<interface>
<net-index>0</net-index>
<config>
<net-index>0</net-index>
<operational-mode>6</operational-mode>
</config>
</interface>
</network-interfaces>
</coherent-module>
</terminal-device>
Validation with Netconf get
Payload Openconfig Get
<filter type="subtree">
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<operational-mode/>
</state>
</optical-channel>
</component>
</components>
</filter>
Get OpenConfig Return
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<operational-mode>6</operational-mode>
</state>
</optical-channel>
<state xmlns:oc-platform-types="http://openconfig.net/yang/platform-types">
<id>OCH-6/0</id>
<name>OCH-6/0</name>
<parent>PORT-coherent-6</parent>
<oper-status xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:INACTIVE</oper-status>
<removable>false</removable>
<part-no>NA</part-no>
<serial-no>NA</serial-no>
<software-version>NA</software-version>
<firmware-version>NA</firmware-version>
<hardware-version>NA</hardware-version>
<description>NA</description>
<mfg-name>NA</mfg-name>
<location>0</location>
<type xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-opt-types:OPTICAL_CHANNEL</type>
</state>
</component>
</components>
Unconfiguration
Use the operation delete to remove this configuration.
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<operational-mode operation='delete'/>
</config>
</optical-channel>
</component>
</components>
Restriction
Acceptable values range 1-6.
Soft-tx-disable
This command is used to disable the transmission of data on a network interface.
Configuration
Disable transmission of slot 6, network interface 0.
OpenConfig Netconf Payload
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393472</index>
<config>
<index>393472</index>
<admin-state>oc-opt-types:DISABLED</admin-state>
</config>
</channel>
</logical-channels>
</terminal-device>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#network-interface 0
OcNOS(config-netif)#soft-tx-disable
OcNOS(config-netif)#commit
OcNOS(config-netif)#
Netconf OcNOS Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<network-interfaces>
<interface>
<net-index>0</net-index>
<config>
<net-index>0</net-index>
<soft-tx-disable/>
</config>
</interface>
</network-interfaces>
</coherent-module>
</terminal-device>
Validation with Netconf get
Payload Openconfig Get
<filter type="subtree">
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>393472</index>
<state>
<admin-state/>
</state>
</channel>
</logical-channels>
</terminal-device>
</filter>
Get OpenConfig Return
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel xmlns:oc-opt-types="http://openconfig.net/yang/transport-types">
<index>393472</index>
<state>
<index>393472</index>
<admin-state>DISABLED</admin-state>
<logical-channel-type>oc-opt-types:PROT_OTN</logical-channel-type>
<trib-protocol>oc-opt-types:PROT_OTU4</trib-protocol>
<description>preset</description>
</state>
<logical-channel-assignments>
<assignment>
<index>1</index>
<state>
<index>1</index>
<assignment-type>OPTICAL_CHANNEL</assignment-type>
<optical-channel>OCH-6/0</optical-channel>
</state>
</assignment>
</logical-channel-assignments>
</channel>
</logical-channels>
</terminal-device>
Unconfiguration
Use the operation delete to remove this configuration
<terminal-device xmlns="http://openconfig.net/yang/terminal-device">
<logical-channels>
<channel>
<index>196864</index>
<config>
<index>196864</index>
<admin-state operation='delete'>
</config>
</channel>
</logical-channels>
</terminal-device>
tx-laser-freq
This command is used to set the laser frequency for a network interface in Hz, THz, GHz, and MHz.
Configuration
Configure the frequency 196100GHz at slot 6 network interface 0.
OpenConfig Netconf Payload
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<frequency>196100000.000000</frequency>
</config>
</optical-channel>
</component>
</components>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#network-interface 0
OcNOS(config-netif)#tx-laser-freq 196100000000000Hz
OcNOS(config-netif)#commit
Netconf OcNOS Payload
<terminal-device xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform-terminal-device">
<coherent-module>
<slot-index>6</slot-index>
<network-interfaces>
<interface>
<net-index>0</net-index>
<config>
<net-index>0</net-index>
<frequency>196100000.000000MHz</frequency>
</config>
</interface>
</network-interfaces>
</coherent-module>
</terminal-device>
Validation with Netconf get
Payload Openconfig Get
<filter type="subtree">
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<oper-status/>
</state>
</optical-channel>
</component>
</components>
</filter>
Get OpenConfig Return
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<frequency xmlns:ipi-oc-terminal-device-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-terminal-device-deviations">191250000</frequency>
<line-port>PORT-coherent-6</line-port>
</state>
</optical-channel>
<state xmlns:oc-platform-types="http://openconfig.net/yang/platform-types">
<id>OCH-6/0</id>
<name>OCH-6/0</name>
<parent>PORT-coherent-6</parent>
<oper-status xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:DISABLED</oper-status>
<removable>false</removable>
<part-no>NA</part-no>
<serial-no>NA</serial-no>
<software-version>NA</software-version>
<firmware-version>NA</firmware-version>
<hardware-version>NA</hardware-version>
<description>NA</description>
<mfg-name>NA</mfg-name>
<location>0</location>
<type xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-opt-types:OPTICAL_CHANNEL</type>
</state>
</component>
<component>
<name>CFP-6</name>
<transceiver xmlns="http://openconfig.net/yang/platform/transceiver">
<physical-channels>
<channel>
<index>1</index>
<state>
<index>1</index>
<output-frequency xmlns:ipi-oc-platform-transceiver-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-transceiver-deviations">191250000</output-frequency>
</state>
</channel>
</physical-channels>
</transceiver>
</component>
</components>
Unconfiguration
Operation delete is used to remove this configuration.
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<frequency operation='delete'/>
</config>
</optical-channel>
</component>
</components>
Restriction
The range permitted is correlated to module brand.
tx-output-power
This command is used to set the output power of the network interface in dBm
Configuration
Configure tx-output-power to 1.0dBm at slot6, network-interface 0.
OpenConfig Netconf Payload
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<target-output-power>1.0</target-output-power>
</config>
</optical-channel>
</component>
</components>
OcNos CLI Command
OcNOS#conf t
Enter configuration commands, one per line. End with CNTL/Z.
OcNOS(config)#coherent-module 6
OcNOS(config-module)#network-interface 0
OcNOS(config-netif)#tx-output-power 1.00
OcNOS(config-netif)#commit
OcNOS(config-netif)#
Netconf OcNOS Payload
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<target-output-power>1.0</target-output-power>
</config>
</optical-channel>
</component>
</components>
Validation with Netconf get
Payload Openconfig Get
<filter type="subtree">
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<target-output-power/>
</state>
</optical-channel>
</component>
</components>
</filter>
Get OpenConfig Return
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<state>
<target-output-power>1.00</target-output-power>
</state>
</optical-channel>
<state xmlns:oc-platform-types="http://openconfig.net/yang/platform-types">
<id>OCH-6/0</id>
<name>OCH-6/0</name>
<parent>PORT-coherent-6</parent>
<oper-status xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-platform-types:ACTIVE</oper-status>
<removable>false</removable>
<part-no>NA</part-no>
<serial-no>NA</serial-no>
<software-version>NA</software-version>
<firmware-version>NA</firmware-version>
<hardware-version>NA</hardware-version>
<description>NA</description>
<mfg-name>NA</mfg-name>
<location>0</location>
<type xmlns:ipi-oc-platform-types-deviations="http://www.ipinfusion.com/yang/ocnos/ipi-oc-platform-types-deviations">oc-opt-types:OPTICAL_CHANNEL</type>
</state>
</component>
</components>
Unconfiguration
Operation delete is used to remove this configuration
<components xmlns="http://openconfig.net/yang/platform">
<component>
<name>OCH-6/0</name>
<optical-channel xmlns="http://openconfig.net/yang/terminal-device">
<config>
<target-output-power operation='delete'/>
</config>
</optical-channel>
</component>
</components>