OpenConfig Command Reference

OcNOS-SP : OpenConfig Command Reference

OpenConfig Command Reference

Troubleshooting

OpenConfig Configurations

Network-instance Object Values for “type” Attribute

Enable OpenConfig Translation

OpenConfig Optical Transport Networks

Enable OpenConfig Translation

Enable Coherent modules

Host Interface, Network Interface, and Logical Channels

Loopback-type on Host Interface

Loopback-type on Network Interface

Disable Coherent-Modules

Operational-Mode

Soft-tx-disable

tx-output-power

Interface Configuration OpenConfig Translation

Configure Interfaces

Configure description

Configure Primary IP Address

Configure Secondary IP Address

Configure IPv6 Addresses

Configure Duplex-mode

Configure Port-Speed

Configure Ethernet Type

Configure Sub-interface with both Primary and Secondary Addresses

LACP OpenConfig Translation

Create Static LAG Interface

Create Dynamic LAG Interface

Tunnel Interfaces OpenConfig Translation

Create Tunnel Interface

BGP OpenConfig Translation

Create BGP Instance

Create BGP Global with Default VRF

Create BGP Global with user-defined VRFs

Configure BGP neighbors

Configure eBGP neighbor with TTL

Create BGP peer-groups with default VRF

Create BGP Peer-groups with User-defined VRFs

Configure Update-source on Neighbor

Double Link in Load Balance

Delete BGP instance

BGP RIB Counters IPv4

BGP RIB Counters IPv6

OSPFv2 Openconfig Translation

Create OSPF process

Create OSPF process

Static Routes OpenConfig Translation

Create a static route

Create a static route with load balancing

Create a static route with active/standby

LDP Openconfig Translation

OpenConfig NetConf Payload

OcNOS CLI Command

OcNOS NetConf Payload

Validation with NetConf get

OpenConfig NETCONF Payload

OcNOS NETCONF Payload

OcNOS CLI Command

OpenConfig NETCONF get Validation

Ocnos NETCONF get Validation

L3VPN OpenConfig Translation

Create VRF instance

Configure MPLS label mode

Create route-targets

Create extended community sets

Add community set to match criteria for route map

Apply routing policy (route map) as import/export

Configure interfaces to access VPN

Configure BGP with neighbors and route redistribution

L2VPN OpenConfig Translation

Configure VPLS with Ethernet type

Configure VPLS with VLAN type

Disabling VPLS mac-learning

Configure VPWS precedence

Platform OpenConfig Translation

System OpenConfig Translation

Logging Remote Server

Logging Remote Facility

VLAN OpenConfig Translation

Match single tagged VLAN

Match single tagged VLAN range

Match double tagged VLAN

Match double tagged with outer and inner VLAN

Ingress-mapping actions

Trunk VLANs in interface

Trunk VLANs in link aggregation interface

Trunk LAG with native VLAN

Creation of a cross connect

Deletion of a cross connect

Configure Bridge Domain and associate L2 Subinterfaces

Deletion of a Bridge Domain instance

Creation of a VLAN bridge

LLDP OpenConfig Translation

Enable management attributes

Configure chassis-id

Configure suppress advertisement

Configure system name

Enable LLDP on an interface

LLDP get attributes

Interface counters

Neighbors name and description

Neighbors chassis-id, type and ttl

Neighbors port-id, type and description

Neighbors custom TLVs type/subtype

Neighbors custom TLVs

Neighbors capabilities

ACL Openconfig Translation

Configure Primary IP Address

Create IPv4 entries

Create IPv6 entries

Create interfaces egress for IPv4/IPv6

Create interfaces ingress for IPv4/IPv6

Create interfaces egress for L2

Create interfaces ingress for L2

QoS OpenConfig Translation

Enable QoS on OcNOS

Enable QoS Profile on OcNOS

Create Classifiers profiles

Create Forwarding-groups profiles

Create Queues and Queue-Management-profiles entries

Create Scheduler-policies entries

Create interfaces classifier association

Create interfaces scheduler-policies association

EVPN Openconfig Translation

Configure EVPN-MAC with inter-instance-policies

Configure EVPN-VPLS type

Configure EVPN-VPWS type

ISIS OpenConfig Translation