bfd echo interval
Use this command to set the BFD echo interval.
Use the no form of this command to reset the echo interval to its default value.
Command Syntax
bfd echo interval <50-4294967>
no bfd echo interval
Parameter
<50-4294967>
Transmit interval in milliseconds.
Default
The default value is 1000 milliseconds.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The following command sets the BFD echo with no values.
#configure terminal
(config)#interface eth1
(config-if)#bfd echo interval 234
Last modified date: 08/28/2023