OcNOS-SP : Layer 3 Guide : Bidirectional Forwarding Detection Command Reference : Bidirectional Forwarding Commands : bfd slow-timer
bfd slow-timer
Use this command to set a BFD slow timer interval.
Use the no form of the command to reset the timer to default values.
Command Syntax
bfd slow-timer <1000-30000>
no bfd slow-timer
Parameter
<1000-30000>
Interval for the slow-timer in milliseconds
Command Mode
Configure mode
Default
Default slow-timer value is 2000
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#bfd slow-timer 1500
(config)#
Last modified date: 08/28/2023