bfd all-interfaces
Use this command to enable BFD for all neighbors maintained by an OSPF process or an ISIS instance.
Use the no form of the command to disable BFD.
Note: This command does not apply BFD to virtual-link neighbors.
Command Syntax
bfd all-interfaces
no bfd all-interfaces
Parameters
None
Default
By default, bfd all interface is disabled
Command Mode
Configure router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ospf
(config-router)#bfd all-interfaces
#configure terminal
(config)#router isis
(config-router)#bfd all-interfaces
Last modified date: 08/28/2023