show ip bgp peer-group
Use this command to list the BGP peer group information in ipv4 unicast.
Command Syntax
show ip bgp peer-group (WORD|)
Parameters
WORD
Name of the peer group
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip bgp peer-group group1
BGP dynamic peer-group is group1, EBGP, remote AS 64902
BGP dynamic peer-group group1 listen range group members:
12.1.0.0/16
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
Peer-group member:
*12.1.1.2
Index 0, Offset 0, Mask 0x1
0 accepted prefixes, 0 announced prefixes
Last modified date: 08/28/2023