mpls-nexthop-tracking
Use this command to activate MPLS nexthop tracking feature for IPv4 Labeled-unicast routes.
Use no form of this command to deactivate MPLS nexthop tracking feature for IPv4 Labeled-unicast routes.
Note: bgp nexthop-trigger enabel must be configured to enable mpls-nexthop-tracking
Command Syntax
mpls-nexthop-tracking
no mpls-nexthop-tracking
Parameters
None
Command Mode
BGP mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#bgp nexthop-trigger enable
(config)#router bgp 100
(config-router)#mpls-nexthop-tracking
Last modified date: 08/28/2023