l2vpn-unnumbered-mode
Use this command to configure the unnumbered peer with all the neighbor configs applicable in L2VPN EVPN address family.
Use the exit parameter with this command to leave L2VPN unnumbered mode.
Command Syntax
bgp l2vpn-unnumbered-mode
exit-l2vpn-unnumbered-mode
Parameters
None
Applicability
No default value is specified
Command Mode
Address-family IPv4 Unicast Mode
Applicability
This command was introduced in OcNOS-OTN version 4.2.
Examples
#configure terminal
(config)#router bgp 100
(config-router)#address-family l2vpn evpn
(config-router-af)#bgp l2vpn-unnumbered-mode
(config-router-l2vpn-unnum)#
Last modified date: 08/28/2023