OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : CFM and Y.1731 Commands : debug ethernet cfm
debug ethernet cfm
Use this command to enable debug for ethernet cfm .
Use no from of this command to disable debug for ethernet cfm
Command Syntax
debug ethernet cfm (all|events|rx|tx|loopback|traceroute)
no debug ethernet cfm (all|events|rx|tx|loopback|traceroute)
Parameters
all
Enable all debugs
events
Enable event debugs
loopback
Enable loopback debugs
rx
Enable receive debugs
traceroute
Enable traceroute debugs
tx
Enable transmit debugs
Default
None
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.0 and option all is introduced in OcNOS version 6.3.0.
Examples
OcNOS(config)#debug ethernet cfm events
OcNOS(config)#debug ethernet cfm loopback
OcNOS(config)#debug ethernet cfm rx
OcNOS(config)#debug ethernet cfm tx
OcNOS(config)#debug ethernet cfm traceroute
OcNOS(config)#no debug ethernet cfm events
OcNOS(config)#no debug ethernet cfm loopback
OcNOS(config)#no debug ethernet cfm rx
OcNOS(config)#no debug ethernet cfm tx
OcNOS(config)#no debug ethernet cfm traceroute
OcNOS(config)#debug ethernet cfm all
OcNOS(config)#no debug ethernet cfm all
Last modified date: 07/11/2023