show ethernet cfm test-signal profile
Use this command to display ETH-Test signal profile configuration.
Command Syntax
show ethernet cfm test-signal profile (WORD|)
Parameters
WORD
Specify the test signal profile name with max length of 64 characters
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#show ethernet cfm test-signal profile 123
Profile Name : 123
Is Receiver : False
Is Generator : True
Test-Signal Type : In-Service
Frame Size(bytes) : 124
Test Pattern Type : Null-Signal-Without-CRC-32
Last modified date: 07/11/2023