show running-config cfm
Use this command to display CFM running configuration alone.
Command Syntax
show running-config cfm
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show running-config cfm
ethernet cfm domain-type character-string domain-name 12347 level 2 mip-creation none
service ma-type string ma-name 123
vlan 10 bridge 10
mip-creation default
ethernet cfm mep down mpid 14 active true xe4
lck state lock
message level 2
interval 1s
frame priority 3
exit-ether-ma-mep-lck-mode
ethernet cfm loss-measurement reply lmm
exit-ether-ma-mep-mode
mep crosscheck mpid 41
exit-ether-ma-mode
!
Last modified date: 07/11/2023