traceroute ethernet
Use this command to start traceroute messages on a remote MEP.
Command Syntax
traceroute ethernet MAC mepid MEPID domain DOMAIN (ma MA_NAME)
Parameters-
MAC
MAC address of the remote MEP or MIP in HHHH.HHHH.HHHH format.
MEPID
Host MEP identifier <1-8191>.
DOMAIN_NAME
Enter the name of the domain. Name must be of 5 characters if type is character-string otherwise no_name if domain-type is no-name1
MA_NAME
Enter maintenance association name. If ma-type is character string then maximum length of ma-name is 6 else if it's integer then maximum is 2-octets.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#traceroute ethernet 0018.236e.5eb8 mepid 201 domain 12345 ma 123
MP Mac Hops Relay-action Ingress/Egress Ingress/Egress action
0018.23ea.da36 1 RlyFDB Ingress IngOK
0018.23ea.da38 2 RlyFDB Egress EgrOK
0018.236e.5eb8 3 RlyHit Ingress IngOK
#traceroute ethernet 0018.236e.5eb8 mepid 201 domain 12345 vpws ETH-2001
MP Mac Hops Relay-action Ingress/Egress Ingress/Egress action
0018.23ea.da36 1 RlyFDB Ingress IngOK
0018.23ea.da38 2 RlyFDB Egress EgrOK
0018.236e.5eb8 3 RlyHit Ingress IngOK
Last modified date: 07/11/2023