OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : EFM OAM Commands : debug ethernet oam
debug ethernet oam
Use this command to set the debugging functions for OAM.
Use the no form of this command to disable OAM debugging.
Command Syntax
debug ethernet oam (event|rx|tx|all)
no debug ethernet oam (event|rx|tx|all)
Parameters
event
Enable event debugging.
rx
Enable RX debugging.
tx
Enable TX debugging.
all
Enable Event, RX and TX debugging
Command Mode
Exec mode and Config mode
Example
#debug ethernet oam event
 
Last modified date: 07/11/2023