OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : EFM OAM Commands : ethernet oam enable
ethernet oam enable
Use this command to enable or disable Ethernet OAM functionality on a port.
Use the no form of this command to disable Ethernet OAM functionality on a port.
Command Syntax
ethernet oam enable
no ethernet oam enable
Parameters
None
Default
Ethernet OAM is disabled.
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ethernet oam enable
Last modified date: 07/11/2023