ethernet oam timeout
Use this command to set the OAM timeout.
Use the no form of this command to reset the timeout to its default.
Command Syntax
ethernet oam timeout <2-30>
no ethernet oam timeout
Parameter
<2-30>
Number of seconds for the link timeout
Command Mode
Interface mode
Default
The default timeout is 5 seconds
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ethernet oam timeout 5
(config)#interface xe1
(config-if)#no ethernet oam timeout
Last modified date: 07/11/2023