show ethernet oam status
Use this command to display the ethernet OAM and link monitoring status of the interface.
Command Syntax
show ethernet oam status interface IFNAME
Parameter
interface
Specify the interface.
IFNAME
Specify the interface name.
Command Mode
Privileged Exec mode
Example
The following sample output displays the operational discovery state machine and link event statistics of the interface.
#show ethernet oam status interface eth0
eth0
General:
Mode: passive
PDU max rate: 10 packets per second
PDU min rate: 1 packet per 1 second
Link timeout: 5 seconds
High threshold action: no action
Link Monitoring:
Status: supported(on)
Symbol Period Error:
Window: 100 million symbols
Low threshold: 0 error symbol(s)
High threshold: none
Frame Error:
Window: 100 x 100 milliseconds
Low threshold: 1 error frame(s)
High threshold: none
Frame Period Error:
Window: 1000 x 100,000 frames
Low threshold: 1 error frame(s)
High threshold: none
Frame Seconds Error:
Window: 1000 x 100 milliseconds
Low threshold: 1 error second(s)
High threshold: none
Last modified date: 07/11/2023