clear g8032 erp-instance

OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : G.8032 ERPS Version 2 Commands : clear g8032 erp-instance

Use this command at the Ethernet ring node for the following operations:

1.Clearing an active local administrative command (forced switch or manual switch).

2.Triggering reversion before the wait to restore (WTR) or wait to block (WTB) timer expires in the case of revertive operation.

3.Triggering reversion in the case of non-revertive operation.

Command Syntax

#clear g8032 erp-instance INSTANCENAME

Parameters

INSTANCENAME

Instance name (maximum 32 characters).

Command Mode

Exec mode.

Applicability

This command was introduced before OcNOS version 5.0.

Examples

#clear g8032 erp-instance INST1

Last modified date: 07/11/2023