show g8032 all erp-instance
Use this command to display details about all ERP instances.
Command Syntax
show g8032 all erp-instance
Parameters
None
Command Mode
EXEC mode.
Applicability
This command was introduced in OcNOS version 6.0.0.
Example
(config)#show g8032 all erp-instance
Inst Name : instance1
State : G8032_ST_INIT
Phy Ring : -
Role : -
East Link : -
West Link : -
Attached : -
Attached To: -
Virt Chan : -
---------------------------------------------------------------
Channel | Interface | Profile
(LEVL, VID, RID) | (east,ver), (west,ver) |
========================================================
(7, 4065, 135) | (eth11,1), (eth2,2) | PROF1
========================================================
Data Traffic: 1,2,3,10,12...
Last modified date: 07/11/2023