switching mode
Use this command to set the revertive behavior of the ring node.
Command Syntax
switching mode (non-revertive | revertive)
Parameters
revertive
Represents revertive mode operation of a G.8032 ethernet ring.
non-revertive
Represents non-revertive mode operation of a G.8032 ethernet ring.
Command Mode
G.8032 profile configure mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
(g8032-profile-config)# switching mode revertive
Last modified date: 07/11/2023