OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : G.8032 ERPS Version 2 Commands : tcn-to-instance
tcn-to-instance
Use this command to associate TCN instance (topology change notification) propagation for an interconnected ring when configured in non-virtual mode.
Command Syntax
tcn-to-instance INSTANCENANME
Parameters
INSTANCENAME
Instance name.
Command Mode
G.8032 configure switch mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
(config)#tcn-to-instance erp1
 
Last modified date: 07/11/2023