local-freeze
Use this command to locally freeze the g8031 protection group.
Use the no form of this command to remove local-freeze from g8031 protection group.
Command Syntax
local-freeze
no local-freeze
Parameters
None.
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#mode one-and-one-bidirectional
(g8031-config-switching)#local-freeze
Last modified date: 07/11/2023