mode
Use this command to configure mode for g8031 protection group.
Use the no form of this command to mode for g8031 protection group.
Note: Once mode is configured, it can not be changed. Administrator has to explicitly delete and re-configure a new mode.
Command Syntax
mode (one-and-one-bidirectional| one-plus-one-bidirectional| one-plus-one-unidirectional)
no mode
Parameters
one-and-one-bidirectional
1:1 Bidirectional mode
one-plus-one-bidirectional
1+1 Bidirectional mode
one-plus-one-unidirectional
1+1 Unidirectional mode
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)##g8031 eps-id 10 bridge 1
(g8031-config-switching)#mode one-and-one-bidirectional
Last modified date: 07/11/2023