primary-vlan
Use this command to configure a primary-vlan for g8031 protection group.
Use the no form of this command to delete primary-vlan for a g8031 protection group.
Note: Once mode is configured, primary-vlan can not be modified.
Command Syntax
primary-vlan <2-4094>
no primary-vlan
Parameters
<2-4094>
vlan id
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#primary-vlan 3
Last modified date: 07/11/2023