revertive
Use this command to configure revertive switchover-type for g8031 protection group.
Use the no form of this command to set default switchover-type for g8031 protection group.
Command Syntax
revertive
no revertive
Parameters
None.
Default
Non-revertive.
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#mode one-and-one-bidirectional
(g8031-config-switching)#revertive
Last modified date: 07/11/2023