timer hold-off-time
Use this command to configure hold-off timer for g8031 protection group.
Use the no form of this command to set default hold-off timer value for a g8031 protection group.
Command Syntax
timer hold-off-time <0-10>
no timer hold-off-time
Parameters
<0-10>
Timer value in seconds.
Default
0 seconds.
Command Mode
Config mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#mode one-and-one-bidirectional
(g8031-config-switching)#revertive
(g8031-config-switching)#timer hold-off-time 3
Last modified date: 07/11/2023