vlan
Use this command to configure protected data vlans for g8031 protection group.
Use the no form of this command to delete a data vlan for g8031 protection group.
Note: Once mode is configured, data vlans can not be modified.
Note: Data vlans have to be configured individually using vlan command i.e Range of vlans not accepted with vlan command.
Note: This command has no impact on data-plane i.e Unprotected vlans are not blocked by g8031 working and protection-ports. It is left upto the administrator to configure only protected vlans with bridge-port configuration of working and protection g8031 ports.
Command Syntax
vlan <2-4094>
no vlan <2-4094>
Parameters
<2-4094>
vlan-id.
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#vlan 4
Last modified date: 07/11/2023