qos profile
Use this command to create new profiles or to update “default” profiles.
Use the no form of this command to remove the profiles.
Note: “exp-encap” profile will be ineffective on tunnels with only 2 nodes with PHP configuration.
Command Syntax
qos profile (cos-to-queue | dscp-to-queue | queue-color-to-cos | dscp-to-dscp | dscp-encap | exp-to-queue | precedence-to-precedence | precedence-to-queue | queue-color-to-dscp | queue-to-exp | queue-to-precedence ) (NAME|default)
no qos profile (cos-to-queue | dscp-to-queue | queue-color-to-cos | dscp-to-dscp | dscp-encap | exp-to-queue | precedence-to-precedence | precedence-to-queue | queue-color-to-dscp | queue-to-exp | queue-to-precedence ) (cos-to-queue | dscp-to-queue | queue-color-to-cos | dscp-to-dscp | dscp-encap | exp-to-queue) NAME
Parameters
cos-to-queue
CoS to Traffic-Class profile
dscp-encap
Egress profile to map dscp(L3) |
Traffic-Class+colour(L2) to dscpEncap
dscp-to-dscp
DSCP to DSCP profile
dscp-to-queue
DSCP to Traffic-Class profile
exp-to-queue
EXP to Traffic-Class ingress profile
precedence-to-precedence
Precedence to Precedence profile
precedence-to-queue
Precedence to Traffic-Class profile
queue-color-to-cos
Traffic-Class color to CoS profile
queue-color-to-dscp
Traffic-Class color to DSCP profile
queue-to-exp
Traffic-Class to exp egress profile
queue-to-precedence
Traffic-Class to Precedence profile
NAME
Profile map name (maximum 32 characters)
Default
By default, “default” profile is created for all the profile types. These profiles can only be updated by the user neither be created nor be destroyed.
Command Mode
Configure modes
Applicability
This command was introduced in OcNOS version 3.0.
Example
To create a new profile:
(config)#qos profile cos-to-queue cos-map
(config)#qos profile dscp-to-queue dscp-map
(config)#qos profile queue-color-to-cos egress-cos-map
(config)#qos profile dscp-to-dscp dscp-dscp-map
(config)#qos profile exp-encap exp-encap-map
Last modified date: 06/07/2023