qos profile queue-to-exp (Qumran2)
Use this command to create new profiles or to update "default" queue to exp profiles.
Use the no form of this command to remove the profiles.
Note: queue-to-exp profile will be ineffective on tunnels with only 2 nodes with PHP configuration.
Note: Non-default profile is applicable only on the nodes where MPLS label is encapsulated. On swap and php nodes default profile is applicable when lsp-model is uniform.
Command Syntax
qos profile queue-to-exp (NAME|default)
no qos profile queue-to-exp NAME
Parameters
queue-to-exp
Profile for Traffic-Class to exp map
NAME
Profile map name (maximum 32 characters)
Default
By default, “default” profile is created for all the profile types. These profiles can only be updated by the user neither be created nor be destroyed.
Command Mode
Configure modes
Applicability
This command was introduced in OcNOS version 5.1 and this command is applicable for Qumran2.
Example
To create a new profile:
To create a new profile:
(config)#qos profile queue-to-exp que-exp-map
Last modified date: 06/07/2023