show isis microloop-avoidance
Use this command to display microloop avoidance FSM states, timer values, and the oFIB route table.
Command Syntax
show isis microloop-avoidance (level-1|level-2|) (detail|)
Parameters
level-1
Display level-1 information only
level-2
Display level-2 information only
detail
Display detailed information for one or both levels
Command Mode
Privileged Exec mode
Applicability
This command was introduced in OcNOS version 6.3.0.
Example
PE1#sh isis microloop-avoidance
Tag 1: VRF : default
Level-1 status:
FSM State: OFIB_STABLE
Level-2 status:
FSM State: OFIB_STABLE
PE1#show isis microloop-avoidance detail
Tag 1: VRF : default
Level-1 status:
FSM State: OFIB_HOLDING_DOWN
Event type: Neighbor Down
Near end: 0000.0000.0001.00 Far end:0000.0000.0004.00
Hold-down timer running: Yes Time Remaining: 00:00:02.716
Delay timer running: No
Level-2 status:
FSM State: OFIB_STABLE
oFIB Route Table:
Destination Metric Next-Hop Interface Tag
L1 3.3.3.3/32 30 10.0.0.2 xe2 0
Src: 0000.0000.0003
L1 4.4.4.4/32 40 10.0.0.2 xe2 0
Src: 0000.0000.0004
L1 30.0.0.0/24 30 10.0.0.2 xe2 0
Src: 0000.0000.0003
Last modified date: 08/28/2023