fast-reroute per-prefix remote-lfa
Use this command to configure remote loop-free alternate fast reroute configuration for a particular level of an IS-IS instance.
Use the no parameter to remove remote loop-free alternate fast reroute configuration.
Command Syntax
fast-reroute per-prefix remote-lfa (level-1|level-2) proto ipv4 tunnel mpls-ldp
no fast-reroute per-prefix remote-lfa (level-1|level-2) proto ipv4
Parameters
level-1
Level 1 only.
level-2
Level 2 only.
Default
By default, fast-reroute per-prefix remote-lfa is not enabled.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 5.1.
Examples
#configure terminal
(config)#router isis 1
(config-router)#fast-reroute per-prefix remote-lfa level-1 proto ipv4 tunnel mpls-ldp
(config-router)#
Last modified date: 08/28/2023